Usage Instructions To use your PowerSaver Model 8 simply plug it into any available socket in your home or building.
When connected flick the power switch on the end of the device so that the lights switch on.This indicates that the device is working properly.
You can leave yourPowerSaver unattended without any problems.
Make certain that the ventilation areas on the side of the case are unobstructed and keep the device flat and away from dirt or liquids.
It may take up to 8 days for the PowerSaver to adjust itself to most efficient settings.Best results are obtained by leaving the device unattended without turning it off.
In the event of a power surge you can replace the internal fuse by unscrewing it from the fuse screw on your device.
Do not use multiple PowerSavers in the same circuit.Should you exceed capacity then you are advised to upgrade to a larger unit.
Our Powersavers work by removing wasteful power 'spikes' from your electrical circuit. They are contracted in a strong metal case and, one plugged in require no further maintenance.
You can view a 3½ minute demonstration of our Powersaver in action here.
